Image MASSter Solo-102 Forensic Hard Drive Duplicator

The Image MASSter Solo-102 Forensic is a compact, economical, high speed, one-to-two SATA/IDE, USB 3.0 Drive Acquisition Device designed as a low cost solution without sacrificing performance and versatility. Keeping up with the latest technology it includes 2 ports for new USB 3.0 interfaces with an average transfer speed of 4.7GB/min. User can make dual copies of a single Suspect drive. Additional features include 1Gigabit Ethernet port to upload images, drive encryption, source drive preview, cell phone imaging capability and more.

• SATA/IDE/USB3.0 interfaces
• Speeds exceeding 7GB/min
• Capture "Suspect" drive to up to 2 "Evidence" drives
• Easy Navigation Swapping Screen Interface
• Average Speeds:
  100% Capture/LinuxDD Capture 1 to 1 at 6.9GB/min
  100% Capture/LinuxDD Capture 1 to 2 at 6.0GB/min
  E01 Capture at 4.2GB/min
  Hash E01 at 7.15GB/min
  E01 Capture + Hash (SHA-1) at 3.7GB/min

Note: This is a custom built piece of equipment and there are no returns or refunds (other than warranty issues).

Image MASSter Solo 102 Internet/Network Connection Disclaimer

Intelligent Computer Solutions, Inc. (ICS) assumes no liability for the security of the customers computer/network systems. ICS assumes no liability for the security of the Image MASSter Solo 102 when it is connected to either the Internet or another Network. Utilizing the Image MASSter Solo 102 for to upload data to a network requires the unit to be connected to the network and this may cause a risk of the system being compromised. The user is responsible for taking the necessary steps to ensure the safety of both the Image MASSter Solo-102 and the network in use when the unit is utilized to upload data to a network. The security of the Image MASSter Solo 102 when connected to the Internet or a network relies on the users discretion; however, ICS recommends, at a minimum, to the user to take the following steps:

The Image MASSter Solo 102 is set to have Internet Connection and Automatic Windows Updates disabled as default. Users will need to enable Internet Connection when uploading data to a network. It is highly recommended that the user install anti-virus and firewall Hardware Device protection prior to connecting the Image MASSter Solo 102 to either the Internet or a network. A lesser protection can be achieved with personal firewall software. Continuously running an updated version of anti-virus software with the Image MASSter Solo 101 may help prevent an intrusion into the unit or network. ICS recommends updating the anti-virus software program every time the Image MASSter Solo 102 is connected to the Internet or a network. Users should always utilize a clean (scanned for viruses) USB Thumb Drive when updating the Image MASSter Solo 102 unit Software or Firmware. Users should ONLY connect the Image MASSter Solo 102 to a network when uploading data. It is imperative for users to REMOVE the Image MASSter Solo 102 connection when not actively performing these tasks.

These recommendations are provided to the user as a reference; however ICS cannot assure that the Image MASSter Solo 102 will not become compromised when connected to the Internet or a network. User assumes all responsibility for the data and security of the Network.